Petra Scape — Landscaping Al Ain & Abu Dhabi

Landscape Soil Preparation and Salinity Control for Abu Dhabi & Al Ain Projects

How to test, amend, leach and specify landscape soil for the sandy, often saline ground of Abu Dhabi and Al Ain — so commercial planting survives the DLP.

In short: Landscape soil preparation is the step that most often decides whether planting on an Abu Dhabi or Al Ain project survives its defects liability period. The native ground is generally sand with very little organic matter and, on reclaimed land or old sabkha flats, high salinity — so a sound specification covers soil testing, an engineered planting medium, gypsum and leaching where salts are high, and drainage designed before the first plant is set. Getting the soil right at BOQ stage is far cheaper than replacing dead planting after handover.

Petra Scape General Maintenance — a landscaping and grounds-maintenance company serving Al Ain and Abu Dhabi, UAE since 2003. Call 050 619 4614 or email info@petrascape.org for a free site visit and quote.

Overview

Landscape soil preparation is the quietest line in a landscaping BOQ and the one most likely to come back as a defect. On a commercial development, school, government facility or private estate in Abu Dhabi or Al Ain, the planting is judged at the handover walkthrough and again months later during the defects liability period — and when it fails, the maintenance contractor is usually blamed first. In practice the cause is almost always in the ground: salinity that was never tested, a growing medium too close to raw sand to hold water, or drainage that trapped salts around the roots. This guide sets out how landscape soil should be assessed, amended and specified for the sandy, frequently saline conditions of the two cities, written for the project managers, specifiers and main contractors who prequalify and award landscaping packages and carry the risk when planting dies.

Why Soil Preparation Decides the Fate of a Landscape Package

Planting is the most visible part of any landscape handover and one of the first things a client inspects. It is also the element most exposed to a slow, public failure: a lawn that thins, feature trees that scorch at the leaf margins, shrub beds that never fill out. By the time those symptoms appear, the growing season for a remedy has often passed and the project is already into its defects liability period, where replacement is at the contractor's cost and in full view of the client. The decisions that prevent this are made long before planting, when the soil is tested, amended and placed. Good soil preparation is cheap relative to the planting it protects and trivial relative to the cost of replacing it. The risk is not that soil works are expensive — they are not — but that they are under-specified, priced as a token 'topsoil' line, and discovered to be inadequate only when plants begin to die.

  • Planting failure in the UAE is more often a soil and drainage problem than a maintenance problem
  • Symptoms appear during the defects liability period, when replacement is at the contractor's cost
  • Soil works are inexpensive compared with the planting they protect
  • A vague 'topsoil' line in the BOQ is the single most common source of substitution and defect disputes

What the Native Ground Actually Is: Sand, Sabkha and Salinity

The default ground across Abu Dhabi and Al Ain is sand: fast-draining, low in organic matter, and holding very little water or nutrient on its own. On its own, clean desert sand is a workable base for native and desert-adapted planting, but a poor medium for lawns, ornamentals and the lush, resort-style planting many clients expect. The more serious issue is salinity. Large parts of the coastal plain and many inland depressions are old sabkha — salt flats where salts have concentrated at and near the surface over long periods. Reclaimed land and sites built up with imported fill can carry salt from the fill material or from a high, saline water table beneath. Where that salt is present and untreated, it limits what will grow regardless of how good the planting medium above it is, because salts move upward through the profile as water evaporates from the surface. Understanding which of these conditions a site presents — clean sand, saline sabkha, or made ground over a salty water table — is the first thing soil testing is meant to establish.

Soil Testing Before the BOQ Is Priced

Soil testing is the step that turns guesswork into a priced scope. Representative samples from the planting zones, analysed for salinity, pH, texture and drainage behaviour, tell you whether the ground can be planted as found, needs amendment, or needs active salinity treatment before anything goes in. On reclaimed, coastal or former sabkha plots, the safe assumption is that salinity is a problem until the results prove otherwise. Testing at tender stage, not after award, is what separates a controlled project from a claims-driven one. When the salinity and drainage picture is known before the BOQ is priced, the amendments, leaching and drainage can be costed into the tender and programmed properly. When it is discovered after award — typically when the first planting declines — the remedy becomes a variation, the programme slips, and the conversation turns to who should have allowed for it. The test is inexpensive; the uncertainty it removes is not.

Building a Planting Medium That Holds Water and Roots

Few plants beyond true desert species thrive in raw local sand, so most UAE landscape planting sits in an engineered growing medium: imported sweet soil blended with sand and organic matter, placed to a defined depth for each planting type. The blend has to do two opposing jobs at once — hold enough water and nutrient for the plant between irrigation cycles, yet drain freely enough that salts and excess water move down and away rather than pooling at the roots. Depth matters as much as the mix. Lawns need a consistent rooting depth across the whole area; shrub beds need more; trees need properly dug and backfilled pits rather than a shallow scrape in the sand. A direct-import supply chain for the sweet soil and organic amendments is a practical advantage here, because it keeps the blend consistent across a large site and avoids the mid-project substitutions that occur when a specified medium is sourced through intermediaries. Mulching the finished beds afterwards protects that investment by cutting evaporation and keeping the surface cooler — the reasoning is covered in our guide to mulch for UAE gardens.

Managing Salinity: Gypsum, Leaching and Drainage

Where testing confirms high salinity, the planting medium above it is not enough on its own — the salt has to be dealt with directly, and before planting. The established approach has three parts that work together. Gypsum is applied to displace sodium from the soil and improve its structure so water can move through it. The profile is then leached with good-quality water so the freed salts wash down below the root zone. And drainage is confirmed or improved so those salts actually leave, rather than sitting in a layer that wicks them straight back up to the surface. The sequence is deliberate: gypsum first, then leaching, with drainage underpinning both. Skipping the drainage step is the most common failure — leaching a profile that cannot drain simply moves the salt around and invites it back. It is also why salinity has to be resolved before salt-sensitive planting goes in: once ornamentals and lawn are established, the practical options shrink to removal and replacement. Choosing a planting palette weighted toward salt-tolerant and native species, as set out in our guide to plants for the UAE desert climate, widens the margin for error on difficult ground.

Specifying Soil in the BOQ Without Ambiguity

Most soil-related disputes are written into the contract before a single plant dies, in the form of a BOQ that describes the growing medium as 'topsoil' and nothing more. That one word invites the cheapest possible interpretation and leaves no basis to reject substandard material on delivery. A specification that holds up names what the medium must be and do:

  • Growing-medium composition — the sweet-soil, sand and organic-matter blend — stated for each planting type rather than a single generic 'topsoil'
  • Minimum placed depth for lawns, shrub beds and tree pits
  • Acceptable salinity and pH range, confirmed against soil test results
  • Amendments to be applied, with gypsum and pre-planting leaching named explicitly where salinity is high
  • Drainage provision for beds and tree pits, including sub-soil drains where the ground does not drain freely
  • The documentation to be handed over: soil tests, delivery dockets, amendment quantities and the leaching record

Why Main Contractors in Abu Dhabi Work With Petrascape

Petrascape General Maintenance LLC SPC has prepared ground and established planting on commercial, government, educational and private projects across Abu Dhabi and Al Ain since 2003 — among them the grounds of the Sheikh Zayed Grand Mosque, UAE University, Al Falah School, Al Khazna Park and the Seed Conservation Center. That track record is built on treating the soil as a civil discipline, not an afterthought: testing the ground before pricing, placing a consistent engineered medium from a direct-import supply chain, and treating salinity with gypsum, leaching and drainage before planting rather than after. As an asset-backed contractor with our own civil-machinery fleet, ISO 9001 and ICV certification, we can mobilise earthworks and soil placement without depending on hired plant, and we document the soil works as part of the project record. Whether we deliver the landscape package as main contractor or as a commercial landscaping subcontractor within a larger BOQ, the planting we hand over is planted into ground that has been prepared to survive its defects liability period.

  • Soil tested and salinity assessed before the BOQ is priced
  • Engineered planting medium from a direct-import supply chain — consistent across large sites, no mid-project substitution
  • Gypsum, leaching and drainage carried out before planting where salinity is high
  • Own civil-machinery fleet — earthworks and soil placement without hired-plant dependency
  • ISO 9001 and ICV certified, with soil works documented for the handover record

How to Prepare and Specify Landscape Soil for a Project in Abu Dhabi or Al Ain

A step-by-step method for project managers, specifiers and landscaping contractors to test, amend and document landscape soil so planting establishes and survives the defects liability period.

  1. Test the existing ground before pricing the BOQ — Take representative samples from the planting zones and have them analysed for salinity, pH, texture and drainage. On reclaimed land, former sabkha or coastal plots, assume salinity is a problem until the results say otherwise. Testing at tender stage lets you price the right amendments rather than discovering the cost after award.
  2. Set the planting medium specification, not just 'topsoil' — Define the growing medium by what it must achieve: an imported sweet-soil and sand blend with added organic matter for most planting, a free-draining mix for desert and native species, and a defined depth for each planting type. Avoid the single word 'topsoil' in a BOQ — it is the most common source of substitution disputes at handover.
  3. Treat salinity before planting, not after — Where salts are high, apply gypsum to displace sodium, then leach the profile with good-quality water so the salts move below the root zone. This has to happen before planting; once salt-sensitive species are in the ground, the options narrow to removal and replacement.
  4. Design drainage into the soil profile — Sandy ground drains fast, but compacted sub-base, buried construction debris or a perched water table will trap salts and drown roots. Confirm that planting pits and beds drain freely, add a drainage layer or sub-soil drains where they do not, and keep irrigation water quality in view so you are not adding salt faster than you flush it.
  5. Document the soil works for the handover record — Keep the soil test results, the delivery dockets for imported media, the amendment quantities and the pre-planting leaching record as part of the project file. This is the evidence that protects the contractor if planting fails during the defects liability period for reasons outside the soil works.

Conclusion

The soil is the part of a landscape contract that is easiest to under-specify and hardest to put right once the planting is in. On the sandy, often saline ground of Abu Dhabi and Al Ain, the difference between a landscape that holds through its defects liability period and one that fails in full view of the client is decided before planting — in the testing, the growing medium, the salinity treatment and the drainage. Petrascape prepares and documents that groundwork as a matter of routine on commercial and institutional projects across both cities. If you have an upcoming project or an active tender with a landscaping package, send your BOQ or specification to info@petrascape.org or call 050 619 4614, and we will return a tender-ready quote with the soil works properly scoped.

Looking for a landscaping contractor for a commercial or government project?

We work as main contractor or landscaping subcontractor on commercial, government and residential developments in Abu Dhabi and Al Ain, and run annual maintenance contracts. Send us a BOQ or tender, or ask for our prequalification pack. Commercial projects.

Looking for a landscaping company in Abu Dhabi? See what we do in each city.

Sources

Frequently Asked Questions

Why does landscape planting fail after handover in the UAE?

On commercial and institutional projects in Abu Dhabi and Al Ain, planting that fails during the defects liability period is far more often a soil problem than a maintenance problem. The usual causes are salinity that was never tested or treated, a planting medium that was too thin or too close to pure sand to hold water and nutrients, and poor drainage that trapped salts around the roots. These are specification and installation failures, decided before the plants ever arrived — which is why the soil works deserve as much attention at BOQ stage as the planting schedule itself.

What does soil salinity do to landscape planting?

High salinity makes it harder for roots to take up water, even when the soil looks moist, and sodium in the soil damages its structure so it drains and aerates poorly. The visible result is scorched leaf margins, stunted growth and plants that decline slowly rather than dying outright. Native and desert-adapted species — Ghaf, date palm and many UAE shrubs — tolerate far more salt than ornamental lawns and imported feature plants, which is why the planting palette and the soil treatment have to be decided together.

Can you fix saline soil, or does it have to be removed?

In most cases saline soil can be reclaimed rather than excavated and carted away. The standard approach is to apply gypsum, which displaces sodium from the soil, and then leach the profile with good-quality water so the freed salts wash down below the root zone. This works only where the ground drains well enough to carry the salts away — if water sits, the salts come back. On sites with a high water table or a compacted layer, drainage has to be improved first. Full soil replacement is the exception, usually reserved for small high-value planting zones or badly contaminated ground.

What should a landscape soil specification include in a UAE BOQ?

A robust specification defines the growing medium by composition and performance, not by the single word 'topsoil'. It should state the sweet-soil, sand and organic-matter blend for each planting type, the required depth for lawns, shrub beds and tree pits, the acceptable salinity and pH range confirmed by testing, the amendments to be applied, and the drainage provision. It should also name the pre-planting leaching step where salinity is high. Clear soil wording at tender stage prevents the material substitutions and defect disputes that otherwise surface at the handover walkthrough.

Does irrigation water quality affect soil salinity?

Yes. Irrigation adds salts to the soil every time it runs, and the lower the water quality, the faster they build up. Treated sewage effluent and some groundwater sources carry more dissolved salts than desalinated supply, so a soil that was prepared correctly can still turn saline over time if the water and the drainage are not managed together. Where recycled water such as treated sewage effluent is used, the planting palette, the leaching regime and the drainage all need to account for it from the outset.